User’s Manual Rev. A
II FEATURES
Specifications
The motherboard is designed with the Intel 82443BX PCI chipset which is
developed by Intel Corporation to fully support the Pentium II Processor
PCI/ISA system. The Intel 82440BX PCI chipset provides increased
integration and improved performance designs. The chipset provides an
integrated IDE controller with two high performance IDE interfaces for up
to four IDE devices (hard devices, CD-ROM device, etc). The Super I/O
controller provides the standard PC I/O function: floppy interface, two
16Byte FIFO serial ports and EPP/ECP capable parallel port. Care must
be taken when inserting memory modules, inserting CPU or even plugging
PCI /AGP card into associated slots to avoid damaging any circuits or
sockets on board. A cooling fan is strongly recommended. The
motherboard supports minimum of 8MB of system memory and a
maximum of 384MB SDRAM. The motherboard provides three 168-pin
DIMM. The board also supports onboard two PCI IDE connectors, and
detects the IDE hard disk type by the BIOS utility which is automatic. The
system also supports Award Plug & Play BIOS for the ISA and PCI cards.
Processor :
Dual Slot1 CPU Supports with Intel Pentium II Processor through S.E.C.
CPU Clock Select :
Support 66,75,83,100 and 133 MHz CPU Front Side Bus
Switching Voltage Regulator :
5-bit VID Auto Select by PII CPU
Chipset :
Intel 440BX AGPsets
System BIOS :
Award 2Mbit Flash ROM Comply with DMI 2.0, PnP, PCI 2.1 , Support CD-
ROM, LS-120 and any IDE Device Bootable, Virus Protection
System Memory :
4 x168-pin DIMM Slots support up to 1GB SDRAM or EDO RAM , Support
ECC Funtion for Reliability
3
