this motherboard use an INTA #, be sure that the jumpers on your PCI
cards are set to INT A.
Assigning DMA Channels for ISA Cards
Some ISA cards, both legacy and PnP, may also need to use a DMA
(Direct Memory Access) channel. DMA assignments for this motherboard
are handled the same way as the IRQ assignment process described
earlier. You can select a DMA channel in the PCI and PnP configuration
section of the BIOS Setup utility.
IMPORTANT:
To avoid conflicts, reserve the necessary IRQs and DMAs for legacy ISA
cards (under PnP AND PCI SETUP of the BIOS SOFTWARE, choose
Yes
in
IRQ xx Used By ISA
and
DMA x Used By ISA
for those IRQs and DMAs
you want to reserve).
Notes:
If you have the problem to install the Windows 95 /98, maybe
system hung up or something wrong, the installation can’t
complete. Please try the following step:
1.
Remove all the Add-ons, only remain the Display Card.
2.
Set the BIOS default value.
3.
Re- Install the OS ( Windows 95 or Windows 98. )
4.
After completely install the OS, add the other expansion cards
one by one.
If your system can’t power on or no display, you may do the
following step to verify the problem:
1.
Check the jumper on the Mother Board.
2.
Set the BIOS to default value.
3.
Remove all the add-ons only remain the VGA Card.
4.
Change the VGA Card with different Slot.
5.
Change the DIMM module.
6.
Remove all the HDD, FDD Cable.
