Enoitalia DELTA 1, User Instructions, Installation And Technical Manual

Page: 10 / 14

Do not put your hands, feet or tools in the machine when it is
moving
10. WASHING AND SERVICING
After using the machine and in any case at the end of the day’s work,
remember to disconnect the electricity
supply by turning off the mains switch and removing the plug from the socket. This operation is essential
to prevent accidental start-up of the machine which could cause damage to the machine itself or injury to
persons.
After disconnecting the machine from the electricity supply, wash it to remove any processing residues, taking
care not to wet the electrical parts.
To wash the machine thoroughly, open it and remove the internal basket.
For washing, use warm water pressure and neutral detergent suitable for contact with food
After washing, if the machine is to remain inactive for a long period, lubricate as follows:

grease the chains and moving parts

lubricate the gears , bearing supports and Teflon supports

lubricate the conveyor screw, stemmer shaft and the screw in the lower tank.
Correct performance of the servicing as above makes the components subject to wear last longer. To improve
maintenance operations we recommend recording the date and type of operation performed.
All servicing must be performed by qualified, authorised personnel or directly by Enoitalia
s.r.l. use lubricants suitable for coming contact with foodstuffs.
The electric motor may in no case be dismantled. In case of need contact the supplier or Enoitalia s.r.l.
Should repair operations be necessary use original spare parts ordered from the retailer or directly from the
manufacturer.
The use of non-original spare parts without authorisation from Enoitalia s.r.l, will lead to
lapsing of the warranty and of the Declaration of Conformity of the machine.
11. TROUBLESHOOTING
PROBLEM REMEDY
The machine has difficulty
starting
Check that the power supply voltage is correct
Do not use extension leads of insufficient diameter which may cause
drops in voltage.
Check the tightness of the transmission belt using the regulator.
The machine will not start Check that the machine is plugged in.
Check that the circuit breaker switch is on and correct setting .
Check the emergency stop work correct
Stone are with pulp
Check the tightness of the transmission belt
Check the shaft and adjust the distance between the inox plate and the basket
Reduce the quantity of the loading fruit
Make sure the fruit you are working is ripe
Make sure you are using a basket with correct hole for the worked fruit