2. CONTENTS OF THE MANUAL
This manual contains all the information and diagrams/ drawings needed for installing, running and servicing
the stemmers.
It also sets out the safety regulations which personnel using the machine must observe.
This manual has been written for: Plant or Department Chiefs; Installation staff; Machine operators;
Servicing staff.
Before using or repairing the machine, personnel must have read and understood the safety
regulations contained in this manual. The manual is an integral part of the machine and must
be made available for easy and rapid consultation. The manual should be stored in a suitable
place far from potential sources of damage.
Specifically:
store it in a clean, dry place and notify all personnel for whom the manual is intended of its
whereabouts
do not attempt to rewrite part of the manual.
This manual is strictly pertinent to machines DELTA 1 destoner in stainless steel.
3.
SAFETY REGULATIONS
NON-OBSERVANCE OF THESE REGULATIONS MAY CAUSE ACCIDENTS TO
PERSONNEL AND DAMAGE TO THE MACHINE
Before commencing any operation on the machine read the instructions in the manual, supplementing the
regulations specified herein with those required by current legislation on safety and accident prevention.
The moving parts of the machine can cause serious injury – operators should therefore pay the utmost
attention when the machine is running. In addition, placing the machine in a damp area may be a source of
accidental electric discharge caused by the electrical contacts of the motor.
Enoitalia s.r.l. therefore declines all responsibility in the case of:
use of unsuitable electrical systems for operating the machine
use of the machine in unsuitable environmental conditions
failure to observe the installation, use and servicing instructions contained herein
use of the machine by unauthorised, unqualified staff
unauthorised modifications to the machine
The machine has been designed specifically for the purpose indicated in the manual. Enoitalia s.r.l.
declines all responsibility for any use of the machine other than that for which it has been designed.
Summary of Contents for DELTA 1
Page 14: ......