4.2 FILLING.
Place the plastic bag on the prong with the cap inserted, as shown in photo no.4.
Adjust the height of the prong in relation to the shelf of the filling
machine so that once the bag has been filled, the level of the liquid inside the bag reaches the plastic
top of the same. This will make it possible to reduce the amount of air inside the bag, should nitrogen
injection not be used.
Lower the filler head so that the extraction pincer adheres to the cap without difficulty. If necessary
turn the head using the handwheel, so as to prevent obstruction in extraction of the cap.
After the cap has been extracted, turn the filler head to the left and insert the filling cylinder inside
the bag.
If this operation should prove difficult because the head is not central to the plastic seat, adjust the
two screws A and B situated high up on the support column (see photo no. 6)
N° 4
N°5
N°6
A
B
Summary of Contents for BB 20
Page 17: ......
