5
Operating Mode
The occupancy sensor is in operating mode after it has successfully been initialized (as
described above) and for as long as sufficient power (generated from ambient light and
stored within the internal energy store) is available.
Linking (learning in) the occupancy sensor
Pressing the menu button in normal operating mode will transmit a link (learn, teach-in)
telegram. The green (link) LED will blink to indicate that a link telegram has been sent.
This link telegram identifies the ID of the occupancy sensor and the EnOcean Equipment
Profile (EEP) used by the sensor (EEP A5-07-01). Based on this information, the receiver
can properly react to subsequent data telegrams from the occupancy sensor
Occupancy Detection and Transmission
If the occupancy sensor detects occupancy for the first time (after a period without
occupancy) then it will immediately transmit of a data telegram indicating the detected
occupancy.
After that immediate initial transmission, the sensor will continue to transmit data
telegrams indicating the detected occupancy every two minutes for as long as occupancy
is detected.
Unoccupied Transmission
If - after a period with detected occupancy - the sensor does not detect occupancy
anymore for 10 minutes then it will send a data telegram indicating that no occupancy is
detected.
If the sensor still does not detect occupancy after another 20 minutes, a second data
telegram will be transmitted indicating that no occupancy is detected. After that, no
additional data telegrams will be sent to indicate that no occupancy is detected.
