10
Lens LED blink on motion transmission (Red LED under PIR lens)
To enable / disable the lens LED blinking on motion transmission, press and hold the
menu button for 3 seconds (only the green LED will blink once after 3 seconds). Release
the button immediately after the LED blink.
After that, the occupancy sensor will indicate the current LED blink on motion
transmission setting as follows:
•
LED blink on motion transmission enabled: 3 blinks from green LED
•
LED blink on motion transmission disabled: 3 blinks from red LED
Heartbeat Transmission
To enable / disable heartbeat transmission, press and hold the menu button for 5 seconds
(both green and red LEDs will blink once after five seconds). Release the button
immediately after the LED blink.
After that, the occupancy sensor will indicate the current heartbeat transmission setting as
follows:
•
Heartbeat transmission enabled: 3 blinks from green LED
•
Heartbeat transmission disabled: 3 blinks from red LED
