Last is the input for a pulsed flow meter. This input requires a signal wire and
a ground wire. The input is designed to accept an input from a flow meter
that provides either a switch closure or a TTL level pulse.
6.
Turn meter on
. Apply power to turn the meter on. You should see the
display show the product name and hear a popping sound coming from the
probe. The Well Watch is now ready to run.
SET UP
POWER ON: Apply power to start the Well Watch. The probe will pulsate and the
LCD screen will display a product information screen for a few seconds then go to the
default DISPLAY mode screen. The depth is displayed on the top line once the unit
adjusts to the well and calculates a stable reading. While the unit adjusts to the well the
display will read “DEPTH SEARCHING.”
Eno Scientific Well Watch 700
Page
14
