CP-60
ENMET
1
1.0 Introduction
The
CP-60
control panel is capable of monitoring from 1 to 3 remote sensors. Some features of the monitoring system are as
follows:
continuous
LCD
menu driven operational and maintenance controls
menu driven calibration procedure
audio and visual alarms indicate unsafe conditions
alarm relay contacts available on terminals
a fault relay and visual fault alarm
alarm acknowledgement capability including audio defeat
mA output for each channel
N
OTE
:
All specifications stated in this manual may change without notice.
1.1 IEC 60601-1 Classifications
Type of protection against electrical shock: Class 1.
Degree of protection against electrical shock: No Applied Parts
- Mains power quality should be that of a typical commercial environment.
1.2 Unpack
Unpack the
CP-60
and examine it for shipping damage. If such damage is observed, notify both
ENMET
customer service
personnel and the commercial carrier involved immediately.
Regarding Damaged Shipments
N
OTE
:
It is your responsibility to follow these instructions. If they are not followed, the carrier will not honor any
claims for damage.
This shipment was carefully inspected, verified and properly packaged at our company and delivered to the carrier in good condition.
When it was picked up by the carrier at
ENMET
, it legally became your company’s property.
If your shipment arrives damaged:
•
Keep the items, packing material, and carton “As Is.” Within 5 days of receipt, notify the carrier’s local office and request immediate
inspection of the carton and the contents.
•
After the inspection and after you have received written acknowledgment of the damage from the carrier, contact
ENMET
Customer
Service for return authorization and further instructions. Have your Purchase Order and Sales Order numbers available.
ENMET
either repairs or replaces damaged equipment and invoices the carrier to the extent of the liability coverage, usually $100.00.
Repair or replacement charges above that value are your company’s responsibility.
The shipping company may offer optional insurance coverage.
ENMET
only insures shipments with the shipping company when asked
to do so in writing by our customer. If you need your shipments insured, please forward a written request to
ENMET
Customer Service.
Regarding Shortages
If there are any shortages or questions regarding this shipment, please notify
ENMET
Customer Service within 5 days of receipt at the
following address:
ENMET
680 Fairfield Court
Ann Arbor, MI 48108
734-761-1270
734-761-3220 Fax
1.3 Check Order
Check, the contents of the shipment against the purchase order. Verify that the
CP-60
is received as ordered. If there are accessories on the
order, ascertain that they are present. Check the contents of calibration kits. Notify
ENMET
customer service personnel of any discrepancy
immediately.
1.4 Serial Numbers
Each
CP-60
is serialized. These numbers are on tags on the equipment and are on record in an
ENMET
database.
