Adjusting the Size/Position of the Selected Marker
The following directions can be used to adjust the Size/
Position of the Line or Window Marker:
1. Make sure the Line/Window marker is currently
Enabled. (Refer back to page 30 if you are not sure how to
do this)
2. To increase or decrease Line/Window marker size
scroll with the Zoom wheel + or - to Marker size on the
setup menu (See Figure 1) and press the Mode button.
3. Use the Zoom wheel + or - to increase or decrease the
size of the Line/Window marker. To exit back to menu press
the Mode button.
4. To move your Line/Window marker up and down, scroll
with the Zoom wheel + or - to the Marker position (See
Figure 2) and press the Mode button.
5. You can now scroll with the Zoom wheel + or - to move
the Line/Window marker up and down. Press Mode button
to exit out of scroll mode.
6. To exit Marker mode, go to the Line/Window Marker that
is currently enabled and the press Mode button or press
Freeze at any time.
Figure 1
Figure 2
Chapter 6 Using the Menu
31
