Delay Mix
This control adjusts the mix of dry signal to wet Delay signal and increases it´s intensity if you
rotate it clockwise.
Delay Time
This control is to adjust the Delay time. The Delay LED shows you the delay time.
The Delay time can
also be tapped with CC #54.
Delay Feedback
This control sets the Delay feedback level and increases the number of repeats if you rotate it
clockwise.
Reverb
This control adjusts mix of dry signal to wet Reverb signal and increases it´s intensity if you rotate
it clockwise.
Noise Gate
Use this knob to set a threshold value (noise level) at which the Noise Gate activates to suppress
the signal. The further you twist the knob to the right, the higher the signal level at which the Noise
Gate kicks in. If you set the knob to the 5 o‘clock position, the Noise Gate reacts to extremely high
noise levels, meaning that there is not much of a margin between the guitar signal and background
noise.
IR Balanced Output – Pre/Post
This button selects the signal source for the IR Balanced Output signal routed to the XLR port.
When the button is not pushed, the line signal is tapped from the preamp.
When the button is pushed, the line signal is tapped from the power amp. The Power Soak must set
to Speaker Off or a speaker load must be connected to the Poweramp Output for this option!
Summary of Contents for Ironball SE E606SE
Page 1: ...E606SE Ironball SE Operator s Manual...
Page 16: ...www engl amps com...
