Store
This push button is to store a setting with programmable features to a MIDI memory slot (generally
called a preset).
This is how it works:
1. Send a PC # message to the amp.
2. Select the desired channel and functions for the preset you want to create.
3. Press and hold the Store push button for about 2 seconds to save the preset to the formerly
sent PC # until the Store button LED is confirming the process by flashing 3 times short.
The Store LED is also signalizing by flashing permanently slow when a change to a preset is
recognized. The LED will stop signalizing changes to a preset while the Delay function is activated,
to avoid confusion.
M.V.B. - Master Volume Boost
This feature increases the master volume level, giving you instant access to two different volume
levels for different musical situations, for instance, one for rhythm parts and the other for lead
lines.
Press this push switch to activate / deactivate the M.V.B. function. The red LED above this push
button lights up to indicate that the function is activated. This feature can also be stored and
switched via MIDI.
Reverb
Press this push button to activate / deactivate the Reverb function. The red LED above this push
button lights up to indicate that the function is activated. This feature can also be stored and
switched via MIDI.
Reverb Tails
Push and hold the Reverb push button for about 2 seconds until the Reverb LED starts to flash.
Three short flashes for Reverb Tails active, one long flash for Reverb Tails inactive. This adjusted
status can be saved to a MIDI preset.
Delay
Press this push button to activate / deactivate the Delay function. The red LED above this push
button lights up to indicate that the function is activated. This feature can also be stored and
switched via MIDI. The Delay LED is signalizing the Delay time, too.
Summary of Contents for Ironball SE E606SE
Page 1: ...E606SE Ironball SE Operator s Manual...
Page 16: ...www engl amps com...
