Using the ENGL Z9 or Z12 to control the amp.
This is how it works:
1. Connect your ENGL Z9 or Z12 to the amp by a
5-pin MIDI
cable.
>> To use the phantom power option you need to use a 5-pin MIDI cable.
2. Activate the phantom power switch (backside of the amp).
>> Deactivate this function if you are using a MIDI footswitch from another manufacturer.
3. Send a PC # message by pressing a switch on the Z9 or Z12.
4. Activate all desired functions on the map you want to add to your preset.
5. Press and hold the Store push button for about 2 seconds to save the preset to the formerly
sent PC # until the Store button LED is confirming the process by flashing 3 times short.
6. The preset is saved to the assigned footswitch.
Whilst the information contained herein is correct at the time of publication, due to our
policy of constant improvement and development, ENGL AMPLIFICATION reserves the right to
alter specifications without prior notice.
E606SE-OM-2-05/21
Summary of Contents for Ironball SE E606SE
Page 1: ...E606SE Ironball SE Operator s Manual...
Page 16: ...www engl amps com...
