Engine Quicksilver 303 User Manual Download

Page: 97 / 150

PATTERNS

STEP ROTATE

Rotating a step backwards or forwards will move the selected step location within the

programmed pattern. This is useful when only one note is recorded into the wrong step

location.

To rotate a step, while holding the pattern step button and FUNCTION, click the black

mini-keyboard button labelled BACKWARD (C#) or the black mini-keyboard button

labelled FORWARD (D#).

You can move a step forwards or backwards multiple steps, any previous notes on the

effected steps will be overwritten.

STEP CLEAR

You can clear a selected step by clicking the black mini-keyboard button labelled CLEAR

(F#). This will remove the step event. This serves the same purpose as clicking a pattern

step button to turn it off.

USER GUIDE

Summary of Contents for Quicksilver 303






















































































































































Search results

Summary of Contents for Quicksilver 303

Reviews:

Related manuals for Quicksilver 303

Brands by name

Popular brands

Engine Quicksilver 303, User Manual

Search results

Summary of Contents for Quicksilver 303

Reviews:

Related manuals for Quicksilver 303

Brands by name

Popular brands