Engine Quicksilver 303 User Manual Download Page 60

Page: 60 / 150

PATTERNS

REALTIME RECORDING

Drum type patterns can also be recorded in realtime, which can be useful for capturing

the expression of a live performance.

To begin realtime recording, press and hold (or double click) the RECORD button.

In RECORD mode, the eight white buttons of the mini keyboard become drum pads for

realtime recording. All eight of the drum instruments can be played simultaneously into

the pattern in realtime.

To add accents, you can press and hold the accent button while playing the drum

instrument pads.

Realtime input from an external MIDI controller can also be recorded, the velocity of the

incoming notes will automatically map to accented notes.

USER GUIDE

Summary of Contents for Quicksilver 303






















































































































































Search results

Summary of Contents for Quicksilver 303

Reviews:

Related manuals for Quicksilver 303

Brands by name

Popular brands

Engine Quicksilver 303, User Manual

Search results

Summary of Contents for Quicksilver 303

Reviews:

Related manuals for Quicksilver 303

Brands by name

Popular brands