Engine Quicksilver 303 User Manual Download Page 69

Page: 69 / 150

PATTERNS

SETTING DRUM NOTE MAPPINGS

By default, the note values for the drum instruments map to the standard GM notes for a

drum kit. The assigned notes for each drum instrument can be changed per track in

DRUM LEARN mode.

To enter DRUM LEARN mode, press and hold (or double click) the FUNCTION button

and then press and hold the DRUM LEARN (song) button. The current selected drum

instrument is shown on the white keys of the mini keyboard and the current note

assignment for the selected instrument is shown on the LED display.

To change the note assignment, while in DRUM LEARN mode, turn control knob 1 or send

a MIDI note from an external MIDI controller.

Use the white mini keyboard buttons to switch instruments while in DRUM LEARN mode,

to quickly set the MIDI note for multiple instruments.

USER GUIDE

The BASS DRUM instrument is set to note number 36

Summary of Contents for Quicksilver 303






















































































































































Search results

Summary of Contents for Quicksilver 303

Reviews:

Brands by name

Popular brands

Engine Quicksilver 303, User Manual

Search results

Summary of Contents for Quicksilver 303

Reviews:

Brands by name

Popular brands