EnGenius ESR-1221N2 User Manual Download Page 81

Page: 81 / 104

8.6.

IP Filter

You can choose whether to Deny or only Allow, computer with those IP Addresses from accessing certain Ports.

This can be used to control which Internet applications the computers can access.

You may need to have certain knowledge of what Internet ports the applications use.

IP Filter

Enable IP filtering:

Tick this box to Enable the IP filtering feature.

Deny all clients with IP addresses

listed below to access the network:

When selected, the computers with IP addresses specified will be

Denied

access to the

indicated Internet ports.

Allow all clients with IP addresses

listed below to access the network:

When selected, the computers with IP addresses specified will be

Allowed

access only to

the indicated Internet ports.

Summary of Contents for ESR-1221N2









































































































Search results

Summary of Contents for ESR-1221N2

Reviews:

Related manuals for ESR-1221N2

Brands by name

Popular brands

EnGenius ESR-1221N2, User Manual

Search results

Summary of Contents for ESR-1221N2

Reviews:

Related manuals for ESR-1221N2

Brands by name

Popular brands