EnGenius ESR-1221N2 User Manual Download Page 56

Page: 56 / 104

Point-to-Point Tunneling Protocol (PPTP)

WAN Interface
Type:

Select whether the ISP is set to Static IP or will allocate Dynamic IP
addresses.

Hostname:

This is optional. Only required if specified by ISP

MAC address:

The MAC Address that is used to connect to the ISP.

Username assigned to you by the ISP

Password:

Password for this username.

Service IP Address:

The IP Address of the PPTP server.

Connection ID:

This is optional. Only required if specified by ISP

MTU:

The maximum size of packets.
Do not change unless mentioned by the ISP.

Type:

You can choose the method that the router maintains connection with
the ISP.

Keep Connection:

The device will maintain a constant connection with

the ISP.

Automatic Connection:

The device will only initiate connection to the

ISP when there is an Internet connection request made from a LAN
device.

Manual Connection:

The user will need to manually connect to the ISP

by clicking the

Connect

button.

Idle Timeout:

When the connection type is

Automatic Connection

, when Internet

traffic is idle, then the device will automatically disconnect from the ISP.

Please specify the Idle time in minutes.

Summary of Contents for ESR-1221N2









































































































Search results

Summary of Contents for ESR-1221N2

Reviews:

Related manuals for ESR-1221N2

Brands by name

Popular brands

EnGenius ESR-1221N2, User Manual

Search results

Summary of Contents for ESR-1221N2

Reviews:

Related manuals for ESR-1221N2

Brands by name

Popular brands