EnGenius ESR-1221N2 User Manual Download Page 54

Page: 54 / 104

PPP over Ethernet (PPPoE)

Username:

Username assigned to you by the ISP

Password:

Password for this username.

Service:

You can assign a name for this service. (Optional)

MTU:

The maximum size of packets.
Do not change unless mentioned by the ISP.

Authentication type

Select whether the ISP uses PAP or CHAP methods for authentication. Select

Auto

if unsure.

Type:

You can choose the method that the router maintains connection with the ISP.

Keep Connection:

The device will maintain a constant connection with the ISP.

Automatic Connection:

The device will only initiate connection to the ISP

when there is an Internet connection request made from a LAN device.

Manual Connection:

The user will need to manually connect to the ISP by

clicking the

Connect

button.

Idle Timeout:

When the connection type is

Automatic Connection

, when Internet traffic is

idle, then the device will automatically disconnect from the ISP.

Please specify the Idle time in minutes.

Summary of Contents for ESR-1221N2









































































































Search results

Summary of Contents for ESR-1221N2

Reviews:

Related manuals for ESR-1221N2

Brands by name

Popular brands

EnGenius ESR-1221N2, User Manual

Search results

Summary of Contents for ESR-1221N2

Reviews:

Related manuals for ESR-1221N2

Brands by name

Popular brands