EnGenius ESR-1221N2 User Manual Download Page 85

Page: 85 / 104

9.3.

Port Forwarding

Port Forwarding allows you to redirect a particular public

port to a computer on your LAN network. This helps

you host servers behind the NAT and Firewall.

In the example below, there is a FTP Server running

on port 21 on the LAN.

For security reasons, the Administrator would like to

provide this server to Internet connection on port 30.

Therefore then there is a connection from the Internet

on port 30, it will be forwarded to the computer with the

IP address 192.168.0.100 and changed to port 21.

Port Forwarding

Enable Port

Forwarding

Tick this box to Enable the Port Forwarding feature.

Description:

Enter a name or description to help you identify this entry.

Local IP:

The local IP address of the computer the server is hosted on.

Protocol:

Select to apply the feature to either TCP, UDP or Both types of packet transmissions.

Local Port:

The port that the server is running on the local computer.

Public Port:

When a connection from the Internet is on this port, then it will be forwarded to the indicated local IP address.

Summary of Contents for ESR-1221N2









































































































Search results

Summary of Contents for ESR-1221N2

Reviews:

Related manuals for ESR-1221N2

Brands by name

Popular brands

EnGenius ESR-1221N2, User Manual

Search results

Summary of Contents for ESR-1221N2

Reviews:

Related manuals for ESR-1221N2

Brands by name

Popular brands