EnGenius ENS202EXTv2 User Manual Download Page 64 | Manualshive

Page: 64 / 66

background image

64

Industry Canada statement

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu,
y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

IMPORTANT NOTE:
Radiation Exposure Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with greater than 20cm between the radiator & your body.

Déclaration d’exposition aux radiations

Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit
être installé et utilisé à plus de 20 cm entre le radiateur et votre corps.

Appendix B - IC Interference Statement

«
...
62
63
64
65
66
»

Summary of Contents for ENS202EXTv2



































































Reviews:

No comments

Related manuals for ENS202EXTv2

Monitouch V9 Series

Brand: Hakko Electronics Pages: 16

Brand: InfiNet Wireless Pages: 100

Brand: Microsemi Pages: 2

Brand: Ubee Pages: 2

Speed Wi-Fi 5G X01

Brand: AU Pages: 64

Wireless LAN Access Point

Brand: Hama Pages: 2

Brand: Ruckus Wireless Pages: 58

Brand: MC Crypt Pages: 5

Brand: EnGenius Pages: 6

Brand: EnGenius Pages: 60

Brand: EnGenius Pages: 62

Brand: EnGenius Pages: 76

Brand: EnGenius Pages: 89

CradlePoint PHS300tw

Brand: Cradlepoint Pages: 2

Brand: Air Live Pages: 171

Brand: Air Live Pages: 161

Brand: AmbiCom Pages: 1

Brand: AmbiCom Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands