EnGenius ENS202EXTv2 User Manual Download Page 57

Page: 57 / 66

Account Settings

This page allows you to change the AP username and
password. By default, the username is

admin

and the

password is

admin

. The password can contain from 0 to 12

alphanumeric characters and is case sensitive.

Administrator Username

: Enter a new username for

logging in to the New Name entry box.

Current Password:

Enter the old password for logging in

to the Old Password entry box.

New Password:

Enter the new password for logging in to

the New Password entry box.

Verify Password:

Re-enter the new password in the

Confirm Password entry box for confirmation.

Apply:

Click

Apply

to apply the changes.

Firmware Upgrade

This page allows you to upgrade the firmware of the
AP.

To Perform the Firmware Upgrade:
1.

Click the

Choose File

button and navigate the OS file

system to the location of the upgrade file.

Select the upgrade file. The name of the file will appear
in the Upgrade File field.

Click the

Upload

button to commence the firmware

upgrade.

Note:

The device is unavailable during the Firmware

upgrade process and must restart when the upgrade is
completed. Any connections to or through the device
will be lost.

Account

Firmware

Summary of Contents for ENS202EXTv2



































































Search results

Summary of Contents for ENS202EXTv2

Reviews:

Related manuals for ENS202EXTv2

Brands by name

Popular brands

EnGenius ENS202EXTv2, User Manual

Search results

Summary of Contents for ENS202EXTv2

Reviews:

Related manuals for ENS202EXTv2

Brands by name

Popular brands