EnGenius ENS202EXTv2 User Manual Download Page 60

Page: 60 / 66

System Log

The AP automatically logs (records) events of possible
interest are in its internal memory. To view the logged
information, click the

Log

link under the System Manager

menu. If there is not enough internal memory to log all
events, older events are deleted from the log. When
powered down or rebooted, the log will be cleared.

Status

: Enable/Disable this function.

Trafic Log

: Enable/Disable this function.

Log type

You may choose one of log types to display logs

in the following window. The default log types is All.

Remote Log

This page allows you to setup the Remote Log functions
for the AP.

Remote Log:

Enable/disable this function.

Log Server Port:

Enter the port of the log server.

Apply:

Click

Apply

to apply the changes.

Log

Summary of Contents for ENS202EXTv2



































































Search results

Summary of Contents for ENS202EXTv2

Reviews:

Related manuals for ENS202EXTv2

Brands by name

Popular brands

EnGenius ENS202EXTv2, User Manual

Search results

Summary of Contents for ENS202EXTv2

Reviews:

Related manuals for ENS202EXTv2

Brands by name

Popular brands