manualshive.com logo in svg

EnGenius ENS202EXTv2, User Manual

The EnGenius ENS202EXTv2 is a powerful outdoor access point that enhances your wireless network's coverage. To easily set up and configure this device, a comprehensive and user-friendly User Manual is available for free download from manualshive.com. Gain quick access to this manual to optimize your wireless network experience.

Share
Download
background image

51

Email Account

Username: 

Enter the username for the email account that 

will be used to send emails.

Password: 

Enter the password for the email account that 

will be used to send emails.

SMTP Server: 

Enter the IP address or hostname of the 

outgoing SMTP server.

Port: 

Specifies the port of SMTP server.

Security Mode: 

Selects the security mode: SSL/TLS or 

STARTTLS or None.

Apply: 

To save setting and take effect.

Summary of Contents for ENS202EXTv2



































































Reviews:

No comments

Related manuals for ENS202EXTv2

LevelOne WAB-5120 Quick Installation Manual preview
WAB-5120
Brand: LevelOne Pages: 14
H3C MSR900-E Routers Installation, Quick Start preview
MSR900-E Routers
Brand: H3C Pages: 2
Shenzhen Hongdian Technologies H8959-4GSPT User Manual preview
H8959-4GSPT
Brand: Shenzhen Hongdian Technologies Pages: 135
KonNad C2000-A2-SMD4240-AC5 User Manual preview
C2000-A2-SMD4240-AC5
Brand: KonNad Pages: 12
Billion BIPAC 6500 User Manual preview
BIPAC 6500
Brand: Billion Pages: 61
Linksys MAX-STREAM EA7250 User Manual preview
MAX-STREAM EA7250
Brand: Linksys Pages: 20
EnGenius M36 Datasheet preview
M36
Brand: EnGenius Pages: 6
EnGenius EMD2 User Manual preview
EMD2
Brand: EnGenius Pages: 60
EnGenius EMD1AP User Manual preview
EMD1AP
Brand: EnGenius Pages: 62
EnGenius ENH900EXT User Manual preview
ENH900EXT
Brand: EnGenius Pages: 76
EnGenius EOC2611P User Manual preview
EOC2611P
Brand: EnGenius Pages: 89
T-Mobile 4G LTE CellSpot Quick Start Manual preview
4G LTE CellSpot
Brand: T-Mobile Pages: 4
T-Mobile Sonic 2.0 User Manual preview
Sonic 2.0
Brand: T-Mobile Pages: 11
Cyberoam NetGenie Soho Quick Start Manual preview
NetGenie Soho
Brand: Cyberoam Pages: 12
EnGenius ECB1200 User Manual preview
ECB1200
Brand: EnGenius Pages: 80
Nimbus Water Systems WiMi310 User Manual preview
WiMi310
Brand: Nimbus Water Systems Pages: 10
TaoTronics TT-BH07 User Manual preview
TT-BH07
Brand: TaoTronics Pages: 35
Nedap PROX-BOOSTER 2G User Manual preview
PROX-BOOSTER 2G
Brand: Nedap Pages: 21

Brands by name

Popular brands

Load more brands