EnGenius ENS202EXTv2 User Manual Download Page 36

Page: 36 / 66

This page displays the current status of the Wireless
settings of the AP.

2.4 GHz Wireless Network

Operation Mode:

Scrow down this list to select operation

modes for implementing on this radio. The default operation
mode is

Access Point

on base stations and Access Points

and is

Client Bridge

on Client Premise Equipements (CPE).

Meanwhile, EnGenius outdoor devices also support WDS
modes for peer to peer or peer to multi-peer connections.

Wireless Mode:

Scrow down this list to select wireless

broadcasting standard on 2.4GHz frequency bands.

Channel HT Mode:

Scrow down this list to select bandwidth

for operating under a frequency band. The default
channel bandwidth is 20 MHz on 2.4GHz frequency radio.

Considering the different applications, users can decide to

implement a channel bandwidth to fulfill real applications.

The larger the channel, the greater the transmission quality
and speed.

Channel:

Click Configuration button to open a new

windows to configure channels for performing wireless
service.

Transmit Power (Tx Power):

Default Tx power is Auto

to obey regulartory power of each country.

Bit Rate:

2.4GHz is default 1 Mbps, the range can

control by BAR via scroll from 1Mbps to 54Mbps.

Summary of Contents for ENS202EXTv2



































































Search results

Summary of Contents for ENS202EXTv2

Reviews:

Related manuals for ENS202EXTv2

Brands by name

Popular brands

EnGenius ENS202EXTv2, User Manual

Search results

Summary of Contents for ENS202EXTv2

Reviews:

Related manuals for ENS202EXTv2

Brands by name

Popular brands