EnGenius ENH900EXT User Manual Download Page 70 | Manualshive

Page: 70 / 76

background image

70

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order
to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

• EN60950-1

Safety of Information Technology Equipment

• EN50385

Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure

to electromagnetic fields (0 Hz - 300 GHz)

• EN 300 328

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating

in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article
3.2 of the R&TTE Directive

• EN 301 893

Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of

the R&TTE Directive

• EN 301 489-1

Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and

services; Part 1: Common technical requirements

• EN 301 489-17

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

Appendix B - CE Interference Statement

«
...
68
69
70
71
72
...
»

Summary of Contents for ENH900EXT













































































Reviews:

No comments

Related manuals for ENH900EXT

Brand: HameTech Pages: 42

Brand: Conrad Pages: 8

Brand: TP-Link Pages: 74

Brand: QWNET Pages: 23

Brand: Ubiquiti Pages: 24

Brand: extronics Pages: 18

Brand: Virgin Media Pages: 24

Brand: Advantek Networks Pages: 62

Brand: TCL Pages: 23

Brand: B-Link Pages: 14

Brand: Ruckus Wireless Pages: 4

Brand: Y!mobile Pages: 2

SpeedNet SDR Series

Brand: S&C Pages: 16

Brand: NetComm Pages: 50

tm-g5240 - T-mobile Hotspot Wireless

Brand: T-Mobile Pages: 95

Brand: Redpine Signals Pages: 62

Brand: ViewSonic Pages: 53

Brand: Nexcom Pages: 89

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands