EnGenius ENH900EXT User Manual Download Page 76 | Manualshive

Page: 76 / 76

background image

76

Appendix E - Detachable Antenna Usage

This device has been designed to operate with an antenna having a maximum gain of 7 dB. Antenna having a higher gain is strictly prohibited per
regulations of Industry Canada. The required antenna impedance is 50 ohms.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved
for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This radio transmitter (IC: 10103A-ENH900EXTA / Model: ENH900EXT) has been approved by Industry Canada to operate with the antenna types
listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included
in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de dB 7. Une antenne à gain plus élevé est strictement
interdite par les règlements d’Industrie Canada. L’impédance d’antenne requise est de 50 ohms.

Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d’un type et d’un gain
maximal (ou inférieur) approuvé pourl’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectriqueà l’intention
des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire àl’établissement d’une communication satisfaisante.

Le présent émetteur radio (IC: 10103A-ENH900EXTA / Model: ENH900EXT) a été approuvé par Industrie Canada pour fonctionner avec les types
d’antenne énumérés ci-dessous et ayant un gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne
non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.

Approved Antenna(s) List

Type :

Dipole

Gain :

5dBi for 2.4G / 7dBi for 5G

«
...
74
75
76

Summary of Contents for ENH900EXT













































































Reviews:

No comments

Related manuals for ENH900EXT

Brand: D-Link Pages: 3

Brand: Wavion Pages: 66

Brand: Panasonic Pages: 18

Brand: Panasonic Pages: 29

Brand: UNICOM Pages: 1

Brand: TRENDnet Pages: 2

Brand: LTE Pages: 8

Brand: NC-link Pages: 13

Brand: Hantech Pages: 13

Brand: TP-Link Pages: 2

Brand: 2N Pages: 82

Brand: 4next Pages: 2

Wireless LAN Access Point

Brand: Hama Pages: 2

Brand: PoeWit Pages: 5

IGAP-420 series

Brand: ORiNG Pages: 56

Brand: ORiNG Pages: 58

Brand: Zte Pages: 17

Brand: EnGenius Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands