EnGenius ENH900EXT User Manual Download Page 69 | Manualshive

Page: 69 / 76

background image

69

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 38 cm between the radiator & your body.

Appendix A

«
...
67
68
69
70
71
...
»

Summary of Contents for ENH900EXT













































































Reviews:

No comments

Related manuals for ENH900EXT

Brand: Mobility Sound Pages: 2

Brand: M-Life Pages: 32

Brand: Digi Pages: 13

MSM-802.11 series

Brand: HP Pages: 32

Brand: HP Pages: 12

ORINOCO AP-4000MR

Brand: Proxim Pages: 2

Brand: EnGenius Pages: 6

Brand: EnGenius Pages: 60

Brand: EnGenius Pages: 62

Brand: EnGenius Pages: 89

Brand: AmbiCom Pages: 40

Brand: High-Flying Pages: 17

QuecOpen AG521R-NA

Brand: Quectel Pages: 93

Brand: Multitech Pages: 35

Conduit MTCAP-915-041

Brand: Multitech Pages: 30

Conduit AP MTCAP2-868-042A-POE

Brand: Multitech Pages: 31

Brand: Multitech Pages: 37

Brand: Multitech Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands