background image

 

ENFORCER 100LB/100CB 

Owner's Manual

SECO-LARM U.S.A., Inc.

Page 6

the ignition is ON.

z

If the shock sensor detects light taps on the
car, it will trigger the pre-intrusion alert (the
siren chirps five times and the parking
lights flash five times) to warn potential
thieves and vandals.  However, if it detects
a strong shock to the car, such as shock
caused by prying the trunk open, it will
trigger the alarm for 30 seconds.  (See
DUAL-STAGE SHOCK SENSOR, page 7)

z

Optional SECO-LARM shock, motion,
glass-break, and microwave sensors will
offer your alarm additional protection.
Ask your SECO-LARM dealer.

While your alarm is armed, your car is
protected in the following ways:

z

Potential thieves or vandals will be warned
by the flashing LED.

z

If a thief opens a door, the alarm
immediately sounds the siren and flashes
the parking lights for 30 seconds.  If the
opened door is not closed and current
sensing has not been selected, the siren
and lights will trigger up to four 30-second
cycles, after which the alarm will rearm.

z

Turning the ignition key ON will trigger the
alarm for 30 seconds.

z

The starter disable prevents the car from
being started.

z

ANTI-CARJACK (optional) is triggered if
someone opens and closes a door while

TOTAL PROTECTION

To disarm the alarm, press the 

 button.  The

siren chirps twice, the parking lights flash
twice, and the LED turns OFF.  What happens
next depends on how your alarm is set (ask
your dealer):

‰

Alarm set for active arming with Secure
Loc

k

OFF

The alarm is now completely disarmed.

‰

Alarm set for active arming with Secure
Lock

TM

 ON

The system will automatically rearm and
relock the doors 30 seconds later unless a
door is opened during this time.  This

prevents accidental disarming.  During
this 30-second period, the LED flashes
quickly.

‰

Alarm set for passive arming
The system will automatically rearm itself
30 seconds later.  If a door is opened, the
system temporarily disarms.  Closing the
open door will again cause the system to
enter the 30-second rearm period.

NOTE — If set for Secure Lock

, the doors

will lock when the system rearms. Otherwise,
the doors do not automatically relock.

DISARMING

If you lose your transmitter, you can disarm
your alarm with the ignition key and the
“VEL” switch.  While your alarm is either
armed or triggered, turn the ignition switch
ON.  Within 15 seconds, press and release
the VEL switch three times.  The siren and the
flashing lights stop if the alarm was
triggered, and then chirp and flash two
times.  (Ask your dealer where the VEL button

EMERGENCY DISARM

is hidden.)
NOTE — If you use emergency disarm, just turn
the ignition OFF and close the doors when you
leave your car, and the alarm arms automatically.
Next time you open a door, you will have 10
seconds of quiet to turn the ignition switch ON
and press the VEL button three times to disarm
the alarm.  This feature is cancelled next time
you use your transmitter to arm or disarm your
alarm.

Summary of Contents for 100CB













Reviews: