ENFORCER 100LB/100CB
Owner's Manual
Page 5
2nd CHANNEL OUTPUT
Your transmitter has an extra channel to
control optional accessories.
2nd channel is commonly used to "pop" the
trunk. To use, press the button for two
seconds, either while the ignition is ON and
any door is opened, or while the ignition is
OFF. The alarm will disarm first to prevent the
siren from sounding.
(NOTE — If no doors
are connected directly to
your alarm, the 2nd
channel will not operate
with the ignition ON. Ask
your dealer for details.)
This is useful if you know, based on
experience, that your shock sensor (or other
add-on sensors) will false trigger, such as
when you park near a construction site.
Should you wish to bypass your alarm's
sensors, first press the button to arm the
alarm (even if the alarm is set for passive
arming). The siren chirps and the parking
lights flash once (three times if a zone is
bypassed) to confirm armed. Within three
seconds, press the button. The siren chirps
three times and the parking lights flash three
times to confirm sensors are bypassed. The
sensors are automatically restored the next
time the button is pressed.
NOTE — The chirps to confirm sensor bypass
will not sound if chirp delete is engaged.
However, the parking lights will still flash
three times. See CHIRP DELETE, page 8.
SENSOR BYPASS
restored.
If your alarm indicates a bypassed zone, find
the cause as soon as possible to ensure your
vehicle is completely protected. For instance,
if your driver’s door is not properly closed
when you arm your alarm, a thief may be
able to open any door without setting off the
alarm.
NOTE — The chirps to confirm zone bypass
will not sound if chirp delete is engaged.
However, the parking lights will still flash three
times. See CHIRP DELETE, page 8.
When you press the button to arm the
alarm, and the alarm responds with three
chirps and three parking light flashes, there
are two possibilities:
A. Delayed domelights — Delayed
domelights do not immediately turn OFF
when you close your car door. This is
normal. The alarm should protect all
doors once the domelights turn OFF.
B. A zone was bypassed — In other words,
the alarm has armed, but a door may not
be protected (either because it is open, or
because its pin switch is broken). If the
bypassed door is later closed, it will be
ZONE BYPASS
→
→
