ENFORCER 100LB/100CB
Owner's Manual
SECO-LARM U.S.A., Inc.
Page 12
A. Arming indicator — Flashes quickly
during the 30-second rearm to show
passive arming countdown.
B. Door open indicator — OFF when a
hardwired door is opened during the
30-second rearm or passive arming
countdown.
C. Armed indicator — Flashes when the
alarm is armed.
D. Disarmed indicator — OFF when the
alarm is disarmed.
E. Tamper and triggered zone ID —
Flashes one or more times after the
alarm is disarmed to indicate which
zone was triggered.
F. RF reception indicator — ON while
any transmitter button is pressed.
G. Valet mode indicator — Flashes slowly
to indicate system is in valet mode.
H. Anti-Carjack — Rapid flashes to
indicate the system is in the anti-
carjack mode.
Appendix 3 — PROGRAMMABLE FEATURES
Appendix 2 — UNDERSTANDING THE LED
FLASHES
Programmable features allow you to customize your alarm. Your dealer can program them when
the alarm is installed.
z
Permanent chirp delete — Can permanently disable the siren’s chirps. See page 8.
z
Passive/active arming — Alarm is default at active arming. Press the button to arm the
alarm. In passive arming, the alarm arms itself when you turn the ignition OFF and close the
last open door.
z
Current sensing — Program the alarm for switch sensing only, or for both current and switch
sensing. Alarm is default at current and switch sensing.
z
Ignition-controlled door lock and unlock — Can be set to lock and/or unlock the doors
automatically when the ignition is turned ON and/or OFF.
z
Double Pulse Lock/Unlock — Alarm default is set at single pulse lock/unlock. Some vehicles
require a double pulse.
z
0.5/3.5-sec. door lock/unlock time — Alarm default is set at 0.5 sec.
z
SecureLock
TM
(Automatic Locking) - If this feature has been enabled under the automatic
arming mode, then the doors will automatically lock once the alarm arms. See page 8.
