ENFORCER 100LB/100CB
Owner's Manual
SECO-LARM U.S.A., Inc.
Page 10
IGNITION-CONTROLLED POWER DOOR LOCKS
Your alarm can be programmed for ignition-controlled operation (doors lock when you turn the
ignition ON, and/or unlock when the ignition is turned OFF). Consult your dealer.
TAMPER INDICATORS & TRIGGER ZONE ID
If your alarm was triggered when you were
away, the siren will chirp two times and the
parking lights flash seven times when you
disarm your alarm. The LED flashes in quick
cycles to show where the car was violated as
follows:
z
1 flash — The ignition was turned on.
z
2 flashes — The alarm was triggered via
panic.
z
3 flashes — The shock sensor or other
add-on sensor was triggered.
z
4 flashes — A door was
opened.
z
5 flashes — The hood
or trunk was opened.
z
6 flashes — Current sensing was
triggered.
These “memory” flashes automatically reset
when the ignition is turned ON.
OTHER FEATURES
•
Starter disable
— With this optional
feature, while your alarm is armed, your car
will not start, even if a thief has your keys.
•
Dual-power protection (DPP)
— Helps
keep your alarm powered even if a thief cuts
the alarm’s main power line. (Optional —
ask your dealer.)
•
Double Pulse Lock/Unlock
— For vehicles
that requires two pulse signals to arm/lock &
disarm/unlock.
