Enerzone Solution 1.6 AGENCY PHASE II CERTIFIED WOOD, Installation And Operation Manual

Page: 15 / 58

Solution 1.6 Installation and Operation Manual
15
4.2 Your First Fires
Two things will happen as you burn your first few fires; the paint cures and the internal components
of the stove are conditioned.
As the paint cures, some of the chemicals vaporize. The vapors are not poisonous, but they do
smell bad. Fresh paint fumes can also cause false alarms in smoke detectors. So, when you first
light your stove, be prepared by opening doors and/or windows to ventilate the house. As you burn
hotter and hotter fires, more of the painted surfaces reach the curing temperature of the paint. The
smell of curing paint does not disappear until you have burned one or two very hot fires.
Burn one or two small fires to begin the curing and conditioning process. Then build bigger and
hotter fires until there is no longer any paint smell from the stove. Once the paint smell disappears,
your stove is ready for serious heating.
4.3 Lighting Fires
Each person who heats with wood develops their own favorite way to light fires. Whatever method
you choose, your goal should be to get a hot fire burning quickly. A fire that starts fast produces
less smoke and deposits less creosote in the chimney. Here are three popular and effective ways
to start wood fires.
4.3.1 Conventional Fire Starting
The conventional way to build a wood fire is to bunch
up 5 to 10 sheets of plain newspaper and place them
in the firebox. Next, place 10 or so pieces of fine
kindling on the newspaper. This kindling should be
very thin; less than 1” (25 mm). Next, place some
larger kindling pieces on the fine kindling. Open the
air control fully and light the newspaper. If you have
a tall, straight venting system you should be able to
close the door immediately and the fire will ignite. If
your venting system has elbows or an outside
chimney, you may need to leave the door closed but
unlatched for a few minutes as the newspaper ignites
and heat in the chimney produces some draft. Once
the fire has ignited, close the door and leave the air
control fully open.
A conventional kindling fire with paper
under finely split wood.
DO NOT LEAVE THE STOVE UNATTENDED WHEN THE DOOR IS SLIGHTLY OPENED
DURING IGNITION. ALWAYS CLOSE THE DOOR AFTER IGNITION.
After the kindling fire has mostly burned, you can add standard firewood pieces until you have a
fire of the right size for the conditions.