4
MODEL: EWB-TRI48V-R
USER’S MANUAL
6. INSPECTION BEFORE DRIVING
(CONTINUED)
EXAMINING LIGHTS AND STEERING INDICATORS
1. Please activate the power supply and operate the light switch to check that headlights and taillights are operating.
2. Please check the front and rear brakes to ensure they are powered.
3. Please operate the steering light to ensure it functions.
4. Please check whether there is damage to the lights and examine carefully.
POLLUTION AND DAMAGE TO THE REFLECTOR AND LICENCE PLATE
1. Please examine the reflector for dirt or damage.
2. Please check that the licence plate is been fastened tightly, is clean and not damaged.
EXAMINATION OF HANDLEBAR
1. Please check that the handlebar is loose by shaking it up and down and left and right.
2. Please check whether the handlebar is too tight.
7. CORRECT DRIVING
STARTING METHOD
Please stand to the left of the vehicle and prop up the main stand to see whether there is no abnormality.
1. Please turn the key "ON" to check lights, switch, horn and power-off switch of brake handle.
If everything is in order, you can retract the main stand and drive.
2. Motor Starting
When you sit on the vehicle, slowly rotate the rolling handle, drive will engage automatically and then increase speed gradually.
DANGER: If the rear wheel is already on the ground and riders are not sitting steadily,
please do not rotate the rolling handle.
SPEED ADJUSTMENT
The speed can be adjusted using the rolling handle. Accelerate slowly and gradually.
Please speed up slowly when you start and go uphill. In this case, power will increase.
If you wish to decrease speed, please loosen the rolling handle.
BRAKING
Efficiency is better if you first use the front brake then the rear brake.
1. After turning the rolling handle, please hold the brake handle tightly.
2. Please brake slowly, the best way is to hold the brake handle tightly.
3. Please do not brake or start suddenly. Sudden braking may cause the scooter to slip or overturn, which is very dangerous.
NOTE: It is very dangerous to brake using the front or rear wheel as this may cause skidding.
TAKE CARE WHILE DRIVING
1. Please keep a natural posture to drive smoothly.
2. Operating safety will be affected by the seat location for two-wheeled vehicles. Try to sit on the middle of the seat cushion
in order to avoid overloading the front wheel and shaking the handlebar which may be hazardous.
3. As it is difficult to accelerate on damaged roads, it is better to drive slowly and use caution.
4. In rain and snow, take care and prepare to brake in advance to avoid skidding. Pay special attention to braking conditions
when the vehicle is wet or driving through water. Please take care as brake efficiency may be impaired after washing
or driving through water. Use caution while braking until the vehicle is dry.
5. In storm conditions, if water levels are higher than the underside of the motor, do not drive through water.