Enertech Global
83
EAV - EME/EMD Rev. A Models
Installation and Operations Manual
Indoor Climate
Under settings, scroll down to Indoor Climate (after entering
passcode).
•
Heat Economy OFF (recommended):
Electric immersion
heat is used under high load conditions (after compressor
runs at maximum RPMs for an adjustable period of time)
•
Heat Economy ON:
Electric immersion heat is not used (not
recommended)
3.1.1 Before Code
3.1.2 Before Code
3.1.0 Advanced Passcode
3.2.0
3.2.1 Heat Curve
3.3.0
3.4.1 Heat Min Temp
3.4.2 Heat Max Temp
3.4.3 Cool Setpoint
3.1.1 After Code (note: file name is 3.1.0.BMP)
3.1.1 Aux Heat Delay
3.3.1 Heat Setpoint
3.4.0
3.5.0
3.5.1 Aux HW Delay
Section 9: On-Board Controls
3.1.1 Before Code
3.1.2 Before Code
3.1.0 Advanced Passcode
3.2.0
3.2.1 Heat Curve
3.3.0
3.4.1 Heat Min Temp
3.4.2 Heat Max Temp
3.4.3 Cool Setpoint
3.1.1 After Code (note: file name is 3.1.0.BMP)
3.1.1 Aux Heat Delay
3.3.1 Heat Setpoint
3.4.0
3.5.0
3.5.1 Aux HW Delay
•
Aux Heat Delay:
Adjust the amount of time the unit must
run full speed before the electric immersion heat is engaged
(Heat Economy mode = OFF)