ASSEMBLY AND USER MANUAL
Combi [6 | 12 | 16] & Combi 12 HT
www.energie.pt
9
4.3.2.
Thermodynamic solar panels
The solar panel is a plate made of twin-channel pressed aluminium with post-pressing anodic oxidation. The panel
has the dimensions 2000 mm x 800 mm x 5 mm and it has a fluid flow entry and exit in a copper-aluminium pipe
with an interior diameter of ¼’’
5.
INSTALLATION
5.1.
Installation Tools required
To ensure correct assembly of the equipment, the installing technician must be endowed with the following tools:
✓
Manometers (low and high pressure).
✓
Vacuum Pump.
✓
Refrigerant gas loading station or scales.
✓
Pipe cutter.
✓
Adjustable spanner.
✓
Screwdriver.
✓
Measuring tape.
✓
Tube bender.
✓
Tube expander.
✓
Refrigerant gas cylinder.
✓
Rotoblock wrench.
✓
Set of hydrant keys or ratchet.
✓
Blowpipe (welding).
✓
Copper rods with 40% of Silver.
✓
Descaler.
To verify the operationality of the equipment the installing technician must have at its disposal:
✓
Multimeter.
✓
Appliance for measuring temperature.
5.2.
Thermodynamic Solar Panel
5.2.1.
Panel orientation
The panels must be at ventilated places and preferably not be exposed to any kind of shade.
ENERGIE
panels must preferably be oriented in a southerly direction (at north hemisphere), but they may also
have an orientation towards Northeast and Northwest.
