ASSEMBLY AND USER MANUAL
Combi [6 | 12 | 16] & Combi 12 HT
16
www.energie.pt
5.3.
Combi Block
5.3.1.
Installation site
The choice of site where the Combi Block is placed is very important and must be carried out bearing mind a
certain number of criteria such as:
✓
Easy access and sufficient space to move the equipment as far as the installation site
✓
Load capacity of the ground (check the weight of the equipment)
✓
Equipment placed on a even base
✓
Point for hydraulic and electrical connections
✓
Avoid the possibility of vibration transmission
✓
Place anti-vibration supports between the appliance and the ground
✓
Position of the piping from the panels
✓
Protected from bad weather such as garages, cellars, attics etc
✓
Allow any possible assistance intervention
To install the Combi Block, is recommended that the site of installation allow the distances shown on the next
scheme:
The installation of the Combi Block near bedrooms should be avoided owing to the possible
transmission of vibrations and noise.
If the Combi Block is placed in the attic special care must be taken as regards the vibrations produced
under the
wooden
construction. Also provide for the placement of a tray under the appliance in
accordance with legislation to collect any water in the event of an installation rupture.
Never grab nor handle the Combi Block by the refrigerant or hydraulic connections.
300 mm
300 mm
300 mm
600 mm
150 mm
