13/28
5.4.
Installation of the product
When mounting the charger, it is important that you attach
the charger upright to the wall or to the vehicle. This means
that the ventilation should be at the bottom of the unit.
Top
Bottom
Ventilation
Each charger has drill holes to attach it to the wall or to your
vehicle. Only use these drill holes to attach the charger.
The assembly below is a suggestion and not an
instructional obligation.
1. Place the charger in the desired location. Make sure it
is level.
2. Mark the drill holes by using a pencil or marker.
3. Take a drill that has the same diameter as your plug.
4. Drill a hole in the previously indicated places.
5. Place the plugs in the drilled holes.
6. Place the charger against the wall. Make sure that the
holes in the charger match the holes in the wall.
7. Attach the charger to the wall.
Drilling holes
Drilling holes
