12/28
5. INSTALLATION
5.1.
Packing list
Description
Amount
Reference
Charger
1
124TA1705
Input cable
1
106TA9617
Output cable
1
166TA5463
Manual
1
166TA8760
5.2.
Safety instructions
• Always wear safety shoes and gloves when working with the multi-charger or battery. If you
do come into contact with battery acid, follow the instructions in chapter 10.3. Attach the
equipment to a stable surface using the appropriate holes on the mounting flanges. In case
of installation on a vehicle, it is advisable to use anti-vibration support.
• The equipment should preferably be installed in a vertical position with the ventilation
facing down. Horizontal installation is not allowed. Never install the multi-charger in a
vertical position with the ventilation facing up.
• If an extension cord or receptacle is used, ensure that the total amperage required for all
equipment on the extension is less than the rating of the extension.
• Place the multi-charger in an open and well-ventilated area.
• To prevent fire or shock hazard, do not expose the multi-charger to rain or moisture.
• Do not install the multi-charger near heat sources such as radiators or air ducts.
• Do not install the multi-charger in a place subjected to direct sunlight, excessive dust,
mechanical vibrations or shocks.
• Make sure that the multi-charger is installed as instructed in this manual and in accordance
with any applicable national or local norm.
• Do not drill additional holes in the multi-charger or attach the multi-charger to the wall or to
your vehicle by using adhesives of any kind.
Never install the charger in a vertical position with the ventilation pointing up.
5.3.
Required material for assembling
The following supplies are a suggestion and not an instructional obligation.
• levelling scale
• pencil or marker
• 4 plugs (6 mm)
• drilling machine
• drill (6 mm)
• 4 screws (5 mm)
