5
EN
SL
HR
BS
SR
IMPORTANT INFORMATION
SAFETY KEY
The safety key must be inserted into the slot on the console and pushed all the way up in order to operate the tread-
mill. Always insert the safety key and attach the clip to your clothing at your waist before beginning your workout. If
you should encounter problems and need to stop the motor quickly, simply pull down the safety key to shut down
the power. To continue the operation, please turn off the power switch, wait a few seconds and switch it on again,
insert the safety key and push it up to the end.
ENGLISH / METRIC CONVERSION
The treadmill computer display can show METRIC and ENGLISH information. This should be preset for your area by the
factory. However, in case the treadmill needs to be converted between METRIC and ENGLISH readout, please follow
the procedure below:
Set the POWER SWITCH to ON. Press the START button on the computer and hold it. Insert the SAFETY KEY then re-
lease the START button. The computer will sound one short beep. Press the START button to switch between ENGLISH
and METRIC and press STOP button to confirm the setting. The computer will sound a long beep and will return to the
POWER ON mode with the new setting.
POWER ON
Set the POWER SWITCH, located on the base frame, to ON and insert the SAFETY KEY. All LED windows light up with
a short beep sound. If no further button inputs are made within 4 minutes, the computer will enter the SLEEP MODE.
Press any button to return to the POWER ON mode.
SLEEP / DISPLAY MODE
When the power is ON the computer will automatically enter SLEEP MODE if it is left idle for 4 minutes without receiv-
ing any input. Press any button to return to POWER ON status when the computer is in the SLEEP MODE.
If you don’t want to use SLEEP MODE, and wonder to get always light up status (DISPLAY MODE) on the screen, then
please consult the following procedure. Firstly, pull out the safety key, furthermore press and hold the SPEED UP and
DOWN buttons, insert the safety key to power on the treadmill. The computer will reply a short beep sound and
shows “1” on the display, press “START” button to enter this setting program, and press the INCLINE UP and DOWN but-
tons to switch between “ON” (SLEEP MODE features on) and “OFF” (SLEEP MODE features off ) in following step. Finally,
please presses STOP/ENTER two times to save this setting and return to POWER ON mode.
STOP / ENTER
When the treadmill is running, press the STOP button to pause the treadmill at any time. All figures on the displayed
on the LED will freeze; furthermore the display shows “PAUSE”. Press START to resume the program and all displays will
continue the performance until the program finishes. If you continue pressing the STOP twice, then all data will return
to 0 and the treadmill will return to POWER ON status. If there is no action within 4 minutes, the treadmill will return to
POWER ON status.
