Energer ENB540DBT, Instructions Manual

Page: 9 / 33

09
19. Stay alert
- Watch what you are doing, use common sense and do not operate the tool
when you are tired.
20. Check damaged parts
- Before further use of tool, it shoul d be carefully checked to determine that it
will operate properly and perform its intended function.
- Check for alignment of moving parts, binding of moving parts, breakage of
parts, mounting and any other conditions that may affect its operation.
- A guard or other part that is damaged should be properly repaired or replaced
by an authorized service centre unless otherwise indicated in this instruction
manual.
- Have defective switches replaced by an authorized service centre.
- Do not use the tool if the switch does not turn it on and off.
21. Warning
- The use of any accessory or attachment other than one recommended in this
instruction manual may present a risk of personal injury.
22. Have your tool repaired by a qualified person
- This electric tool complies with t he relevant safety rules. Repairs should only
be carried out by qualified persons using original spare parts, otherwise this may
result in considerable danger to the user.
ADDITIONAL SAFETY RULES FOR BENCH DRILL PRESS
- This machine must be firmly secured to a suitable workbench or other stable
work surface. When selecting a suitable location for mounting this machine
consideration must be given to the maximum length of the material to be drilled or
machined and the position of the operator.
- Before starting the machine ensure that drills and other recommended cutting
tools are fitted correctly and that all the securing bolts are tight. Check all
guards are fitted and operating correctly and that the chuck key and any other
adjustment tools have been removed.
- Keep hands well away from rotating drills and other cutting tools at all times.
- When drilling use the correct cutting lubricant /coolant for the material being
drilled. Use only sufficient to prevent the drill from overheating and make sure that
Technical and legal information
GB
IE
In
m
o
re
d
e
ta
il
..
.
!
Warning!
Ensure that power tools are disconnected from the mains supply when
not in use,
making adjustments and before servicing, lubricating or
when changing accessories such as blades, bits and cutters.
ENB540DBT by ENERGER