120430
72
All brands and logos are registered trademarks of their respective owners
POWER MANAGEMENT SYSTEM - LAN
9. Troubleshooting
Problem
Solution
The circuit breaker is
activated (tripped).
The load connected to the device is
too high, some of the devices
connected to the PMS-LAN should be
disconnected and the circuit breaker
should be reset.
The switching command is
not carried out, the rocker
switch and indicators are not
lit.
There is no power supply to the PMS-
LAN. Please, make sure the PMS-LAN
is connected to the power supply and
the rocker switch is switched on.
The status of PMS-LAN in
Power Manager does not
become
Connected
Try to ping the device (see section 6.1
above)
PMS-LAN is connected to
local network (ping test is
ok) but not responding.
Reset PMS-LAN by pressing the
Reset button
on the side control panel
(see Figure 2 above) or switch it off
and then on again using the
Main
rocker switch Z
(see Figure 1 above).
Connection to PMS-LAN is
lost. It seems something is
wrong with its IP address.
Make sure PMS-LAN is connected to
LAN and switched on. Launch
Find
PMS-LAN
utility. You can also try to
Summary of Contents for PMS-LAN
Page 1: ......
