120430
23
All brands and logos are registered trademarks of their respective owners
POWER MANAGEMENT SYSTEM - LAN
The socket shown in Figure #7 is currently off. It will turn on
automatically on the 14th of January at 10:15 and switch off at
18:00. The two events will be executed with a loop period of 1
day.
The current time of the web-server and information about the last
successful timer synchronization is also displayed. Automatic
timer synchronization is used if the
Use NTP for time correction
option is enabled (see section 4.6 below).
Note:
If a socket has a switching fault:
e.g. it has been switched on but the whole device is switched off
OR
e.g. it has been switched off but there is voltage at the socket
...then the warning message
Wrong voltage on socket!
will be shown
above the
Event schedule
(see Figure #7 above).
This message may also indicate that this socket is defective. For setting
up the socket schedule use the
Set schedule
button (see Figure 8).
Summary of Contents for PMS-LAN
Page 1: ......
