120430
13
All brands and logos are registered trademarks of their respective owners
POWER MANAGEMENT SYSTEM - LAN
If
your LAN does not have DHCP server
you may prefer to
connect PMS-LAN directly to the managing computer LAN
adapter (network card) using the supplied
crossover
RJ-45
cable.
If you choose for
option B
then the following procedure is
required to let the PMS-LAN obtain a fixed IP address:
Turn PMS-LAN off (with the
Main rocker switch Z
)
Hold down the
IP Config (C)
button on the side control panel
(see Figure 2 above) with the tip of a pen and turn the
Main
rocker switch Z
on. Wait for about 3 seconds until you hear the
sockets switching twice.
This procedure will force the PMS-LAN to reset itself to the
default settings below ...
IP: 192.168.0.254
Subnet mask: 255.255.255.0
Gateway: 192.168.0.1
DNS:0.0.0.0
DHCP: enabled
IP filtering: disabled
Power Manager client port: 5000
Summary of Contents for PMS-LAN
Page 1: ......
