Eneo ENC-501L Installation And Operating Manual Download Page 8

Page: 8 / 72

2.3 Flank Panel

1. Lens Mount:

This LAN CAMERA is used with either C or CS mount lens.

2. IRIS:

Auto iris connector

This camera works with DC drive auto iris lens. Please refer to the pin assignment marked on the camera when
connecting the auto iris lens.

3. ALC VR:

Iris control VR

When an auto iris (DC Drive) lens is used, this VR is used to adjust the iris for different lighting environments.
Adjust the VR clock-wise will open the iris and counter-clockwise will close the iris of the camera.

4. DIP Switch:

1. AES:

Auto electric shutter

2. DC IRIS:

Use auto iris (DC drive)

3. DHCP:

Turn On / Turn Off use DHCP protocol. The switch points upwards, the device can get an

IP automatically by setting this option, if provided with a DHCP server.

4. STATIC IP:

The switch points down, the device can’t obtain an IP address from the DHCP server.

This option is need to configure the network communication settings.

Right Flank Panel

Left Flank Panel

5. Reset:

Recover to factory default

6. POWER Indicator:

Indicates the power status of the unit. The green light indicates the unit is activating.

The red light indicates the power cannot move. If the SD Card is withdrawn in this mode, the card will break.

7. LAN Indicator:

Indicates the LAN status of the unit. The green light indicates the 100 Mbps Ethernet network is

activating. The red light signals the LAN is data linking.

8. SD CARD Slot:

This is used for system software updating and archiving / accessing critical images.

Summary of Contents for ENC-501L









































































Search results

Summary of Contents for ENC-501L

Reviews:

Related manuals for ENC-501L

Brands by name

Popular brands

Eneo ENC-501L, Installation And Operating Manual

Search results

Summary of Contents for ENC-501L

Reviews:

Related manuals for ENC-501L

Brands by name

Popular brands