66
67
3. Now we are ready to FTP! After you connect your computer to the network, type in
ftp 192.168.1.168
like
procedure above.
Warning:
The IP Address of 192.168.1.168 is an example, and it should be modified upon your own Lancam
®
setting.
4. Put in your login account and password like procedure and .
0(Default setting of Lancam
®
is
admin
and
9999
).
5. Before you upload any file, you need to type in the command
bin
like procedure . This is to ensure that
the files get transferred from your computer to the FTP server in binary format instead of ASCII type.
6. To start uploading the update file, use the
put
. command. For this case, you should write
put update.bin
like
procedure . After your file gets uploaded, a message will appear telling you that the transfer is complete and
you will be provided with some basic statistics on the data transfer.
7. To end your FTP session, type in
quit
or
bye
like procedure . And to quit out of MS-DOS prompt, type
exit
.
8. Lancam
®
itself will invoke an update procedure in 10 seconds after receiving your file. The red LED on its rear
side will flicker during the update period. And it will reboot automatically after all steps were done correctly.
Notes
1. All illustrations may be a little varied under your Windows
®
OS.
2. The filename you uploaded during procedure must be
update.bin
and make sure of its validity.
A vital error may be occurred due to wrong source.
3. Using
cd
command to change the path of uploading file if any necessary.
4. All network services will shutdown when processing updating; however, you should re-connect Lancam
®
after
about one minute.
5. Please dont power-off Lancam
®
during step 8 above or physical damages will be caused.
Summary of Contents for ENC-501L
Page 71: ...71 ...
