68
enabled.
Target network
The IP address of the destination address. (Default
route using 0.0.0.0)
Subnet mask
Used to indicate which bits of an IP address identify
the subnet where the host is located and which bits
identify the host's bit mask (the default route uses
0.0.0.0)
Next hop address The router looks at the destination address of the
packet and forwards it to the address of the next
port according to its own routing table.
Network port
Network equipment of the various ports. Currently
used are Ethernet ports.
To enter the [System Management] - [Routing Interface] menu bar, in the routing interface
page, you can choose to set the IP address and set the IP address, subnet mask, default
gateway, DNS, click the bottom of the page, Save> button to save the configuration.
The interface item is described as follows:
Interface item
Description
MAC Address
Media access control, or physical address,
hardware address, used to define the location of
network equipment.
Network port
Network equipment of the various ports. Currently
used are Ethernet ports.
Summary of Contents for 221890
Page 5: ...5 1 3Board Diagram...
