Eneo 221890, User Manual

Page: 10 / 80

10
(4) Use screws to fit the installation hanger at rack’s fixed slot, make sure the device is
installed at rack’s bracket steadily.
Instruction
This product’s fixing hangers are just to fix the switch rather than support it. Use brackets
under the device (fixed to the rack) to support switch when install the switch to the rack.
2.3.2 Workbench Installation
You can put this product on clean, stable, grounded workbench. The installation procedure
as below:
(1)Carefully put the device upside down, clean the grooves on the chassis backplane with
soft cloth to make sure there is no oil or dust in it;
(2)Remove the stickers on the foot pad, paste the foot pad in backplane groove;
(3)Carefully put the device upright on the workbench.
2.3.3 Wall-hung Installation
You also can put the product on clean, steady vertical wall. Installation procedure is below:
(1) Use the screws to fix the hangers;