23
can enable / disable the port, set the port rate, enable / disable the traffic control, click the
<Modify> button to modify the settings. Click the <Save> button to save the configuration.
As shown below:
The interface item is described as follows:
Item
description
Port Enable
Select to enable / disable the port.
Port rate
Set the port port rate, can be set to auto-negotiation, 100M full duplex,
100M half duplex, 10M full duplex, 10M half duplex.
Flow Control
Select to enable / disable flow control.
Port Range
Enter the port number to be modified, enter one or a group of ports, or
select from the following check boxes. The range of the port is 1 to 26. If
you set a port, enter the corresponding port in the port range ; If you set a
set of ports, you can use "," or "-" separated.
"," Is used to set a set of discrete ports, such as 1,3,5.
"-" is used to set up a set of consecutive ports, such as 1-8.
In the [Port Settings] page, you can view the status and configuration information of each
port.
Summary of Contents for 221890
Page 5: ...5 1 3Board Diagram...
