62
number
of
users
ranging from 1 to 1024.
Periodic
re-certification
Set whether to enable the periodic re-authentication
timer on the port.
Port Range
To set the port to enable 802.1X authentication, enter
one or a group of ports, or select from the following
check boxes. If you set a port, enter the corresponding
port number in the port range;If you set a group of
ports, you can use "," or "-" separated.
"," is used to set a set of discrete ports, such as 1,3,5.
"-" is used to set up a set of consecutive ports, such as
1-8.
On the [Port Security Authentication] page, you can view the configuration information of
port security authentication.
The interface item is described as follows:
Interface Item
Description
Port
Corresponds to the serial number of each port of
the switch.
Port Sign
Display the identity of the current port.
Control Mode
Display the control mode of current ports.
Control Type
Display the control type of the current port.
Maximum
Display the maximum number of authenticated
Summary of Contents for 221890
Page 5: ...5 1 3Board Diagram...
